ASKA TECHNOLOGIES

ASKA-2839

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  40-pin AT Interface (IDE) connector                  JP1

  4-pin connector-Drive active LED                     JP2

  34-pin control cable connector-floppy drive          JP3

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Floppy drive enabled                   JP4              closed

      Floppy drive disabled                  JP4               open

                       MISCELLANEOUS TECHNICAL NOTES

   Some versions of this card do not have a floppy enable/disable jumper
                                 on board.